- ²úÆ·ÏêÇé
¡¡¡¡WRVϵÁÐת»»Æ÷²ÉÓÃÁËÔʼÉè¼Æ£¬¾ß±¸¸ßƵÂö³å¿í¶Èµ÷ÖÆ(PWM)µçÁ÷ģʽµ÷½ÚÆ÷£¬Äܹ»Ö§³Ö¼«¿íµÄÊäÈëµçѹ·¶Î§¡£ÕâÖÖÉè¼ÆʹµÃWRVϵÁÐÌرðÊʺÏÓÚ·ÇÎÈѹµçÔ´Ó¦Óã¬ÀýÈçµç³ØºÍÌ«ÑôÄܵç³ØµÈ£¬Í¬Ê±Ò²ÊÊÓÃÓÚÐèÒª¶àÖÖµçÔ´ÊäÈëµÄϵͳ¡£ÓÉÓÚ²»ÐèÒªÔ¤µ÷½ÚÆ÷£¬ÕâÖÖÉè¼Æ²»½ö¼ò»¯ÁËϵͳ½á¹¹£¬»¹½µµÍÁ˳ɱ¾¡£´ËÍ⣬WRVϵÁÐÄܹ»ÊµÏÖÑϸñµÄÊä³öµçѹµ÷½Ú£¬²¢Ìṩ·Ç³£µÍµÄÎÞÂö³åÎƲ¨£¬Î¶ÈϵÊý(TC)µÍÓÚ50 ppm/¡ãC¡£
¡¡¡¡WRVϵÁÐÌṩÈýÖÖÊä³öµçѹ·¶Î§£º0ÖÁ2kV¡¢2.5kV»ò3kV¡£Í¬Ê±£¬ËüÖ§³ÖÈýÖÖÊäÈëµçѹ·¶Î§£º3.6ÖÁ10Vdc¡¢6ÖÁ15VdcÒÔ¼°1.5ÖÁ26Vdc£¬Êä³ö¹¦ÂÊΪ1W¡£ÕâЩÌØÐÔʹµÃWRVϵÁÐת»»Æ÷ÔÚ¶àÖÖµçÔ´»·¾³Öж¼ÄÜÌṩÎȶ¨¿É¿¿µÄµçÁ¦×ª»»½â¾ö·½°¸¡£
¹æ¸ñ²ÎÊý£º
| Parame ters | Specifications | ||||||||||||
| Input vol- tageVin (pins 1&2 | [5]:absolute maximum 15Vdc,recommended:from 3.6 to 10Vdc [12]:absolute maximum 28Vdc,recommended:from 6 to 15Vdc [24]:absolute maximum 28Vdc,recommended:from 13.5 to 26Vdc | ||||||||||||
| Input current (roomtem- perature | [5] | [12] | [24] | ||||||||||
| Vin | 3.6Vdc 10.0Vdc | 5.0Vdc | 10.0Vdc | 6.0Vdc | 12.0Vdc | 15.0Vdc | 13.5Vdc | 24.0Vdc | 26.0Vdc | ||||
| Inibit Mode | <40¦ÌA | <60¦ÌA | <150¦ÌA | <70¦ÌA | <200¦ÌA | <300¦ÌA | <240¦ÌA | <600¦ÌA | <650¦ÌA | ||||
| HV setting = 0V | <6mA | <5mA | <5mA | <2mA | <2.5mA | <3mA | <5mA | <6mA | <6mA | ||||
| HV setting = 2.5Vdc no load | <110mA | <90mA | <55mA | <70mA | <50mA | <40mA | <55mA | <40mA | <40mA | ||||
| HV setting= 2.5Vdc full load | <560mA | <440mA | <220mA | <350mA | <180mA | <150mA | <160mA | <95mA | <90mA | ||||
| HVoutput Vout (pin 9) | Programmable voltage:referto the Selection Guide for voltage ranges | ||||||||||||
| Polarity | Fixed positiveor negative | ||||||||||||
| HV setting (pins 3,4) | Via an external voltage source 0 to+2.5Vdc. An external potentiometer,minimum resistance 2k,canbe used assosiated with the reference voltage(pin5) The input impedance of the HV setting is 1M. Accuracy:+/-0.2%at ratedoutput voltage. | ||||||||||||
| Max.output current lout | Refer to the Selection Guide | ||||||||||||
| Load voltage regulation | ¡À0.01%for no load to full load | ||||||||||||
| Line voltage regulation | ¡À0.01 %over recommended input voltage range | ||||||||||||
| Residual ripple | 0.002% | ||||||||||||
| Temperature coefficient | <50ppm/¡æ | ||||||||||||
| Output HVmonitoring (pin 6) | 0/+3,000V,output impedance=1kQ Accuracy:+/-0.2%at rated output voltage | ||||||||||||
| Output current monitoring (pin 7) | 0/+3,000V,output impedance=10 Accuracy:+/-1%after compensation (see note) | ||||||||||||
| Output reference voltage (pin5) | Refer to the Selection Guide | ||||||||||||
| Inhibition mode (pin 8) | ¡À0.01%for no load to full load | ||||||||||||
| Operatingcase temperature | -40¡æ to+80¡æ | ||||||||||||
| Storage temperature | -40¡æto+80¡æ | ||||||||||||
| Safeguards | ¡¤Arc and short circuit protection ¡¤Soft start feature:the start is guaranted with no overshoot ¡¤Protected against reverse Vin (-30Vdc max.) ¡¤HV | ||||||||||||
¶©¹ºÖ¸ÄÏ£º
