ÐÓöÎ- ¹ÙÍø´úÀí,Æ·ÅÆ±£ÕÏ!

  • WRMϵÁÐ1W DC-DC¸ßѹµçÔ´

    ·¢²¼ÓÚ£º2024-07-05 10:04:19

    Æ·ÅÆÃû³Æ£ºSDS High Voltage

    • ¶©»õÖÜÆÚ£º2-4ÖÜ
    • Á¢¼´¶©¹º

    ÖØÒª²ÎÊý£º

    ¹¦ÂÊ£º1W

    ÊäÈëµçѹ£º+ 5/+12/+25 Vdc

    Êä³öµçѹ£º1.0/2.0/3.0 kVdc

    ¹¤×÷ζÈ£º-40¡ãC to +80¡ãC

    ³ß´ç£º47.0 x 28.0 x 12.5 mm

    ÖØÁ¿£º35g

    • ²úÆ·ÏêÇé

    ÌØµã£º

    Æ½Ãæ°²×°

    ¿íÊäÈ뷶Χ

    µçѹ¼à¿Ø

    ¹æ¸ñ²ÎÊý£º

    Parame-
    ters
    Specifications
    Input vol-
    tage Vin
    (pins 1&2
    [5]:absolute maximum 15Vdc,recommended:from 3.6 to 10Vdc
    [12]:absolute maximum 28Vdc,recommended:from 6 to 15Vdc
    [24]:absolute maximum 28Vdc,recommended:from 13.5 to 26Vdc
    Input current
    (room tem-
    perature

    [5][12][24]
    Vin3.6Vdc
    10.0Vdc
    5.0Vdc10.0Vdc6.0Vdc12.0Vdc15.0Vdc13.5Vdc24.0Vdc26.0Vdc
    Inibit.
    Mode
    <40¦ÌA<60¦ÌA<150¦ÌA<70¦ÌA<200¦ÌA<300¦ÌA<240¦ÌA<600¦ÌA<650¦ÌA
    HV
    setting =
    0V
    <6mA<5mA<5mA<2mA<2.5mA<3mA<5mA<6mA<6mA
    HV
    setting=
    2.5Vdc
    no load
    <110mA<90mA<55mA<70mA<50mA<40mA  <55mA<40mA<40mA
    HV
    setting=
    2.5Vdc,
    full load
    <560mA<440mA<220mA<350mA<180mA<150mA<160mA<95mA<90mA
    HV output
    Vout
    (pin  9)
    Programmable voltage:referto the Selection Guide for voltage ranges
    PolarityFixed positiveor negative
    HV setting
    (pins  3,4)
    Via an external voltage source Oto+2.5Vdc.
    An external potentiometer,minimum resistance 2k,can be used assosiated with the reference voltage (pin5).
    The input impedance of the HV setting is 1M.
    Accuracy:+/-0.2%at ratedoutput voltage.
    Max.output current loutRefer to the Selection Guide
    Load voltage regulation¡À0.01%for no load to full load
    Line voltage regulation¡À0.01%overrecommended input voltage range
    Residual ripple0.002%
    Temperature coefficient<50ppm/¡æ
    Output HVmonitoring (pin 6)0/+3,000V,output impedance=1kQ
    Accuracy:+/-0.2%at rated output voltage
    Output current monitoring (pin 7)0/+3,000V,output impedance=10
    Accuracy:+/-1%after compensation (see note)
    Output reference voltage (pin 5)Refer to the Selection Guide
    Inhibition mode (pin 8)¡À0.01%for no load to full load
    Operating case temperature-40¡ã¡æto+80¡æ
    Storagetemperature-40¡æto+80¡æ
    Safeguards¡¤Arc and short circuit protection
    ¡¤Soft start feature:the start is guaranted withno overshoot
    ¡¤Protectedagainst reverse Vin(-30Vdc max.)
    ¡¤HV

    ¶©¹ºÖ¸µ¼£º

    image.png

    ÔÚÏßÁôÑÔ

    ÔÚÏßÁôÑÔ

    ¡¾ÍøÕ¾µØÍ¼¡¿¡¾sitemap¡¿